Fireproof 1.75mm PLA 3D Printer Filament For 3D Electronics / 3D Pen / FDM Printer

Fireproof 1.75mm PLA 3D Printer Filament For 3D Electronics / 3D Pen / FDM Printer

PLA datasheet.pdf

• PLA+ performance. Superior than normal PLA on market.
• 100% virgin material without cheap plastic fillers or regrind.
• Specific plasticizer is added to increase the toughness. Vacuum sealed with desiccant.
• Update formula to increase toughness, impact strength and elongation at break.
• Better extruding performance to avoid clogging, wrinkling, blobs, rough and uneven surface.
• Easier stick to hot bed to solve first layer issue. Advanced spooling technique to avoid filament tangling.
• Glossy type finish. Long-term keeping the natural color and luster; Excellent toughness, More wearable and weathering proof.

Product

PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn't require a heated bed. It has the following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability

Package

Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum packed—›Inner box;

black spool size : in poly bag(Vacuum packing) with a desiccant bag inside

Filament with spool

Inner box size: 20.8 X 20.8X 7.3cm

I : 4 box/carton carton size : 43.5 X 43.5 X 8cm

II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm

III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm

Filament without spool

Inner box size: 18.5*18.5*7cm

12 box/carton carton size : 39*39*23.5cm

Characteristics

1.PLA can be processed in low temperature
2.PLA with 3mm can be processed in 185,PLA tastes like fried corn
With high intensity and stiffness, PLA can print structure parts of 3D printer for DIY users
3.PLA enjoys excellent formability, low thermal denaturation and only 0.3% shrinkage,

making firm adhesion between layers
3.PLA has bright colors and can be made semi-transparent
4.PLA, as an environment biomaterial is extracted from corn
5.Have good surface gloss and smoothnessSends out noodors in processing
6.PLA can avoid curling and warping in printing

Service

A1:Are you factory ?
N1: Yes,welcome to visit our factory at any time.
A2:All product have a warranty ?
N2: Yes,all kinds of our products have 1 years warranty at least.
A3:what is the payment terms?
N3: T/T,paypal,alipay etc.
A4:Can we disign package ?
N4: Yes.
A5:Can we print our logo on the product?
N5: Yes,We can do it for you.
A6:Can we customize product?
N6: Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7: Check the type of filament you're working with and set the proper extruder temperature base on the type and heated build platform if applicable;trial and error.

Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament,then decrease the temperature by 5°C until properly extruded.Please note this will vary with each 3D printer.